I believe everyone is familiar with the monitoring system, which is installed in many stores and communities. However, most people don't know that monitoring is actually a system, which is one of the components of the entire security system. In many people's concepts, installing a monitor is all about installing a camera and adding a monitor. In fact, this idea is wrong. There are many details and matters for monitoring installation requirements that you need to understand. The following editors will tell you specifically what are the monitoring installation requirements?
What are the monitoring installation requirements:
1. Requirements for installation location
For surveillance cameras, the location is directly related to the monitoring effect of the device. Therefore, in order to prevent the camera from interference from the surrounding environment, a better monitoring effect can be achieved. When installing indoors, we must ensure that the height of the equipment is not less than 2.5m as much as possible, and in outdoor environments, we also need to place the monitoring equipment at a height above 3.5m from the ground to avoid affecting the camera effect!
2. Camera wiring requirements
For the network camera, its routing method is obviously richer than the traditional analog camera. However, no matter which transmission method is used, signal interference is one of the issues we must pay attention to. For devices that use wireless signal transmission, there are fewer restrictions on the line. However, the camera itself must also avoid strong magnetic interference sources around it, while ensuring that the camera is isolated from the ground.
3. Demand for lighting environment
When using a surveillance camera at night, in order to avoid reflections and shadows, lighting equipment is usually required. It is generally recommended to use infrared lighting instead of ordinary light bulbs. Because the long-term work under strong light will eventually cause the color filter on the sensor chip to be permanently discolored, causing the camera to appear streaks in the surveillance image. So, if possible, we put the camera in a "smooth" mode as much as possible.
4. High-performance terminals are indispensable
Network speed has always been one of the important reasons why network monitoring is difficult to expand. It is precisely because of this factor that there has been a long-term two-tier differentiation for network users-those who have the strength to adopt a self-built network, but users who are not capable can only endure slow transmission, or find another way. However, with the continuous improvement of compression technology and the optimization of the network environment, the living environment of network monitoring has also gradually improved.
5. Installation of equipment accessories
In addition to some complete aspects mentioned above, some camera auxiliary equipment installation specifications are also links that we must not ignore in construction. Is the camera PTZ, rack, and other equipment installed in a stable location that is easy to operate and maintain? The distance from the back and sides of the rack to the wall must meet the maintenance requirements. When necessary, we must install a protective cover or temperature control device on the camera to prevent direct light.
Previous: Ten errors and five important points for network integrated wiring Next: None